Mauget · nutrient
Inject-A-Min Manganese: rate per inch, label facts, and uses
Inject-A-Min Manganese is Mauget's Manganese 1% + Iron 2.5% nutrient for trunk injection. The dose is set by DBH band on the label, not by a flat rate per inch, and the table below is the app's copy of that label table. What it is labeled for, when it goes in, and how the label check reads it.
Label check
1 warningLast application was 14 days ago. Proceed with a documented override, or reschedule.
Label facts
Inject-A-Min Manganese
- Manufacturer
- Mauget
- Active ingredient
- Manganese 1% + Iron 2.5%
- EPA registration no.
- Not an EPA-registered pesticide
- Category
- nutrient
- Application
- trunk injection
- Frequency
- Annual or as needed based on soil/leaf analysis
- Retreatment interval
- 365 days minimum
- Protection
- About 12 months
- Time to effect
- About 21 days
Read the Inject-A-Min Manganese label (manufacturer PDF). The label is the legal document; this page is the app's copy of it.
Application months
per labelThe app does not carry a month window for this product; the pest’s treatment page sets the timing.
Rate table
Dose per tree by DBH band
Milliliters of product per tree, from the label table the app's calculator uses. Low, medium, and high are the label's pressure tiers; the treatment page for the pest says which one applies.
2 to 4
- Low
- 6 to 12 mL
- Medium
- 6 to 12 mL
- High
- 6 to 12 mL
5 to 7
- Low
- 12 to 18 mL
- Medium
- 12 to 18 mL
- High
- 12 to 18 mL
8 to 10
- Low
- 24 to 30 mL
- Medium
- 24 to 30 mL
- High
- 24 to 30 mL
11 to 15
- Low
- 30 to 42 mL
- Medium
- 30 to 42 mL
- High
- 30 to 42 mL
16 to 20
- Low
- 48 to 60 mL
- Medium
- 48 to 60 mL
- High
- 48 to 60 mL
21 to 30
- Low
- 60 to 90 mL
- Medium
- 60 to 90 mL
- High
- 60 to 90 mL
31 to 42
- Low
- 90 to 126 mL
- Medium
- 90 to 126 mL
- High
- 90 to 126 mL
Worked examples
Dose per tree
Inject-A-Min Manganese
8″ DBH
24 to 30 mL low, 24 to 30 mL medium, 24 to 30 mL high (label band 8 to 10 in)
Inject-A-Min Manganese
14″ DBH
30 to 42 mL low, 30 to 42 mL medium, 30 to 42 mL high (label band 11 to 15 in)
Inject-A-Min Manganese
24″ DBH
60 to 90 mL low, 60 to 90 mL medium, 60 to 90 mL high (label band 21 to 30 in)
For the tree in front of you, with injection sites and the pest tier applied, use the tree injection rate calculator.
Labeled uses
What the label covers
Target pests and diseases on the label (4)
Iron Chlorosis · Manganese Deficiency · Nutrient Deficiency - Manganese · Zinc Deficiency
The label check runs this list against the host, the pest, the month, the dose, and the last application on the tree before a prescription goes out.
FAQ
Questions arborists ask
What is Inject-A-Min Manganese?
Inject-A-Min Manganese is a nutrient from Mauget with Manganese 1% + Iron 2.5% as the active ingredient. It is applied by trunk injection.
What is the Inject-A-Min Manganese rate per inch of DBH?
The label sets the dose by DBH band, not a flat rate per inch. A 8 inch tree takes 24 to 30 mL low, 24 to 30 mL medium, 24 to 30 mL high (label band 8 to 10 in). The PHC Rx calculator reads the band for the tree in front of you and sets the number of injection sites.
How often can Inject-A-Min Manganese be applied?
Label frequency: Annual or as needed based on soil/leaf analysis. Minimum retreatment interval 365 days. Expected protection about 12 months. Time to effect about 21 days.
Where do these numbers come from?
The PHC Rx product catalog, built from the Inject-A-Min Manganese label linked above, and synced to this page from the app. The label is the legal document; if the two disagree, the label wins and the catalog gets fixed.
Related